Densen Fabel-CAST
FabelCAST is the clever and simple solution on to get streaming on your Densen product!
FabelCAST allows you to mount an external streamer (we suggest ChromeCAST Audio for it’s cheap price yet high quality streaming when using the digital output. but can be used with any streamer with an optical output) directly to your Densen integrated or pre-amplifier.
FabelCAST is designed to be mounted in the expansion board slot located on the back of the Densen B-110 / B-120 / B-130 / B-150 / B-175 / B-230 / B-250 and B-275.
FabelCAST has a dedicated powersupply for the CAST module, and comes with a special Densen power supply cable for the CAST, and a special Densen digital cable, to allow perfect digital transfer to the DAC.




HighLights
Want to enter the age of streaming? Add a FabelCAST board to your Densen integrated or pre-amplifier!
- Easily upgrade your Densen integrated- or pre-amplifier with high quality DAC which allows for easy connection to a streamer
- User install-able. Only requires the installer to solder a single wire!
- Compatible with B-110, B-120, B-130, B-150, B-175, B-230, B-250, B-275 and all variants there of.
- Designed in Denmark – Made in Denmark
Description
FabelCAST is the clever and simple solution on to get streaming on your Densen product!
FabelCAST allows you to mount an external streamer (we suggest ChromeCAST Audio for it’s cheap price yet high quality streaming when using the digital output. but can be used with any streamer with an optical output) directly to your Densen integrated or pre-amplifier.
FabelCAST is designed to be mounted in the expansion board slot located on the back of the Densen B-110 / B-120 / B-130 / B-150 / B-175 / B-230 / B-250 and B-275.
FabelCAST has a dedicated powersupply for the CAST module, and comes with a special Densen power supply cable for the CAST, and a special Densen digital cable, to allow perfect digital transfer to the DAC.
From the FabelCAST board, a flat cable connects to the DP connector internally in the Densen amplifier, thus using the RIAA board connector for the FabelCAST on all non-xs products. In the New XS models it’s possible to connect both as it has an addtional DP connecter. That is, for power supply and for sending the audio signal into the amplifier. By creating the FabelCAST for a built-in DAC, the owner saves the cost of a cabinet and pays only for the DAC itself and saves the signal cable between DAC and Amplifier, and thereby gets a significantly shorter signal path.
FabelCAST has 1 optical input and 1 USB power output. FabelCAST is optimized for perfect performance in all areas. The advanced 4-layer teflon print includes a screen layer, that protects DAC and signalpath against high frequency radiation. The analogue stages utilize Densen’s unique nonfeedback Class A technology. A great deal of work has been done in optimizing the signal path so as to minimize the negative impact on the signal. The development team has focused on creating a DAC that not only sets new standards for the price range, but is able to play music in a way that allows the listener to focus on the music and forget about the technology. In the FabelCAST, not only the digital and analog steps are perfected. The power supply is also perfected. It basically bases on the power supply that is prepared for RIAA connectivity in all Densen products. That is, a power supply optimized for sensitive signals. On the FabelCAST itself, additional powersupplies are added so that DAC and the individual analogue stages have separate supplies to avoid interference and ensure that each stage works optimally.
FabelCAST uses the best components throughout the design. It includes custommade capacitors, Vishay metal film resistors, and high-quality film capacitors. The DAC itself is a new type of 24 bit / 192Khz converter, mounted under a shielding box, to avoid digital interference with analogue stages. FabelCAST is transparent, dynamic, precise, engaging, musically correct, and with a precise stereo perspective, with the ability to create a reproduction so good that you just focus on the pure music.
Contact your Densen dealer or Densen directly for a FabelCAST upgrade, or simply order your Densen with the FabelCAST mounted, if you are buying a new Densen. As always for a Densen product, the motto is: Life is too short for boring Hi-Fi.
Please note the USB-port is only a powersupply port and cannot be used to connect digitally to other components (iphone, PC etc.).
specs & Features
- 24 bit /192 kHz DAC
- 1x optical input, 1x USB power-output (NOT USB DIGITAL INPUT)
- Compatible with B-110, B-120, B-130, B-150, B-175, B-230, B-250, B-275 and all variants there of.
- On “base” and “PLUS” models the FabelDAC takes over line-1 and thus a phonoboard and FabelDAC cannot be accomodated on the same time.
- On “XS” models a FabelDAC can be fitted along a phonboard. The line-1 input will become the phono input, while the FabelDAC will show up in the display as “internal DAC”.
- User-installable – only requires the installer to solder a single wire. Find install guide here
- Weight: 500 grams
Reviews & Customer feedback
There are no reviews for this product yet – Be the first to leave a review below!
Do you own a DP-07? We are always seeking feed-back for our products – both positive and negative. We have a clear idea about our products, but sometimes it helps to get a perspective
Accesories

Densen B-230XS
The B-230XS is a pre-amplifier with style, grace, and incredibel musical performance.

Densen B-250XS
The B-250XS delivers much more than state-of-the-art musical performance - it makes music come alive.

Densen B-130XS
A unique performer, the B-130XS takes the best from the B-150XS, and offers this at a reduced price.
2 x 80 watts in 8 ohm.

Densen B-150XS
The B-150XS output stage uses Densen’s unique ”DMCD” technology that secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound.
2 x 100 watts in 8 ohm.