Densen
B-150XS

The B-150XS is filled with advanced solutions which all share the goal of giving you even more musicality and flexibility. The output stage uses Densen’s unique DMCD (Densen Mass Current
Distribution) technology that secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound
 

As the B-150XS is a wide bandwidth design it goes to 400.000Hz, resulting in improved slew-rate. 

HighLights

The integrated Densens are built to perform and
are crafted with the same care and technology as

their separate siblings. Each unit is the result of perfect craftmanship.
 
  • Build using DMCD Technology – Densen Mass Current Distribution
  • Relay controlled volume attenuator with 200 steps! (0.5 dB)
  • Insanely overpowered 750VA toroidal powersupply.
  • 130.000 uF capacitor bank made with Custom Densen capacitors
  • Expansionport for DP-07 phonoboard – turn your line-1 input into a phono-input.
  • Expansionport for future upgrades (DAC, Surround, Streaming)
  • Upgradeable with external powersupply (1-NRG, 2-NRG)
  • Designed in Denmark – Made in Denmark

Description

The new reference integrated amplifier from Densen is perhaps the most advanced integrated amp on the market. It is filled with advanced solutions, which all share the goal of giving you even more musicality and flexibility.

The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor. Compared to a normal volume potentiometer of the kind used in the majority of all preamps, the resistor network has virtually no self induced noise and an extremely low distortion. This results in an unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.

The B-150XS output stage utilizes Densen’s unique ”DMCD” (Densen Mass Current Distribution) technology. The B-150 is, as with all other Densen amplifiers, The DMCD technology also secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound. As the B-150XS is a wide bandwidth design it goes to 400.000Hz, resulting in improved slew-rate.

The B-150XS is built using surface mounting techniques, and the components are mounted with a precision of 0.02mm (!) using silver solder. All solderings are made in an artificial atmosphere, consisting of nitrogen, to avoid oxidation of the solderings. The power supply is massive, consisting of a 750VA transformer and having a storage capacity of 130.000uF with 4 separate rectifiers, two of which are capable of 3.000VA. Unusually for an amplifier, not all of the capacitors are mounted in a capacitor bank, as some of them are located directly adjoining the output stage for faster power delivery. All resistors are laser trimmed metal film from Vishay with a precision of 0.1%. The B-150XS delivers 100W in 8 ohm and 200W in 4 ohm.

The transformer is custom-made for the B-150XS, and is winded using a new technique. This technique reduces vibration from the transformer and therefore reduces mechanical noise from the cabinet. At the same time, this prevents mechanical vibrations from reaching the delicate audio signals on the PCB. It also works as an isolation transformer, thereby eliminating the need to use separate power conditioners.

The special winding techniques used also ensure that the transformer modulates less than is normal (for other amplifiers) during the delivery of large amounts of current. Transformers normally lower the voltage during the delivery of large amounts of current which results in compression of the signal’s dynamics. As a result of the new winding method the transformer in the B-150XS is extremely stiff, which means that the voltage does not drop under large current deliveries.

The printed circuit board is made of Teflon, and is double sided to allow for the signal on one side and the ground plane on the other, thereby optimising interference free signal transfer.

The B-150XS contains sockets for the SB Board for surround, DP-03 and DP-06 MM and MC stages. There is also the possibility of upgrading the B-150XS with the DNRG external power supply to further enhance the sound quality, so as to experience truly breathtaking musical experiences. The B-150XS is also prepared for the SAXO electronic crossover, so that the B-150XS can be used in active systems. This is done by mounting the crossover internally in the B-150XS in a socket. The SAXO crossover will fit all passive speakers on the market.

The DenLink system implemented in all Densen products allows 2-way communication in multiroom installations. On the B-150XS, the link system will allow the user to power up a link amplifier in the kitchen, or another room, and then control the main system in for example the living room, sending the signals to and from the kitchen, for playback in another room. It will be possible to have full display information in another room, with status on all products. The DenLink / Multiroom system is also prepared for controlling the lights, so you will be able to dim them.

 

specs & Features

  • Power output in 8 ohms: 2x100W
  • Power output in 4 ohms: 2x200W
  • 4 – line inputs + 1 tape in/output
  • 2 pre-amp outputs for bi-amp wiring
  • processor-loop for use as power-amp in a home-theater setup
  • ERP-input for use with external Densen powersupplies (1-NRG, 2-NRG)
  • expansionport for use with expansion modules (Surroundboard, DAC-boards, streamingboards)
  • Internal DP-connector – connect a DP-module and turn line 1 into a phono input (DP-07 MM module)
  • Gizmo system remote compatible
  • SAXO compatible
  • Powersupply size: 750VA
  • Storage Capacity: 130.000 uF
  • THD + Noise @ rated output: less than 0.05%
  • Frequency response: 2-500.000 Hz
  • Weight: 14 kg
  • Dimensions (WxDxH): 440x310x64 mm
  • Available in silver with chrome buttons, black with chrome buttons or black with gold buttons
  • Designed and Made in Denmark

Reviews & Customer feedback

No reviews yet!
Be the First to leave a review!

Do you own a B-150XS? We are always seeking feed-back for our products – both positive and negative. We have a clear idea about our products, but sometimes it helps to get a perspective

Upgrades

DP07 MM phono stage

Expand the capability of your Densen integrated or pre-amplifier with a MM-phonoboard. Installing the board takes 30 seconds and gives your amp a truely high-end phono input.

FabelDAC

Want digital inputs in your Densen amplifier? The FabelDAC is easy to mount, and provides 2x high quality COAX inputs.

SB-1 surroundboard

Expamnd your Densen with a surround-expansionboard. Connect your DVD-player or other 5.1 or 7.1 surroundsound output to the SB-1, And your Densen becomes a high-end multichannel pre-amp

1-NRG external powersupply

Considering an upgrade to your HiFi system? Get the most out of your Densen system with an external power supply.

FabelCAST

Easily upgrade your Densen amplifier to a streaming amp! Install the FabelCAST expansionboard along with a ChromeCast Audio - and voila! Welcome to the streaming Era.

SB-2 surroundboard

An upgraded version of the SB-1, the SB-2 uses the highest quality components to give you the ultimate surround experience from your Densen.

Accesories

Densen RCA interconnect

The Densen RCA Interconnects are Densens very first venture into the Hi-Fi cable world and has quickly become a favorite in the price-range for Densen owners and others alike.

Gizmo remote

We believe in one remote to control them all! No matter if you are just getting your first Densen system, or you own a B-200 from 1996, this remote isn't just a remote, it's an experience.

Denlink cable

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.