B-150XS – Densen.dk

Densen
B-150XS

The B-150XS embodies power and refinement in its amplification, resulting in excellently balanced and transparent sound reproduction. It boasts many of the same qualities as its bigger brother, the B-175, at a lower power output.

Before being usurped by the B-175, the B-150XS reigned supreme in Densen’s integrated lineup, and as such, it possesses much of the excuberance expected from a flagship model. The B-150XS is filled with advanced solutions which all share the goal of giving you even more musicality and flexibility.

HighLights

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

200 0.5dB step relay volume control
Powerfull 750VA Torrodial powersupply which is encapsulated in order to isolate the main-PCB from vibrations.
130.000uF capacitor bank made with Custom Densen capacitors
Expansionport for DP-07 phonoboard – turn your line-1 input into a phono-input.
Expansionport for future upgrades (DAC, Surround, Streaming)
Upgradeable with external powersupply (1-NRG, 2-NRG)
THD + Noise @ rated output: Less than 0.05%
Designed in Denmark – Made in Denmar

Description

The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor. Compared to a normal volume potentiometer of the kind used in the majority of all preamps, the resistor network has virtually no self induced noise and an extremely low distortion. This results in unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.

The B-150XS output stage utilizes Densen’s unique ”DMCD” (Densen Mass Current Distribution) technology. The DMCD technology also secures an extremely firm grip on the speakers combined with a fast, precise, and truly transparent sound. As the B-150XS is a wide bandwidth design it goes to 400.000Hz, resulting in improved slew-rate.

The B-150XS is built using surface mounting techniques, and the components are mounted with a precision of 0.02mm (!) using silver solder. All solderings are made in an artificial atmosphere, consisting of nitrogen, to avoid oxidation of the solderings. The power supply is massive, consisting of a 750VA transformer and having a storage capacity of 130.000uF with 4 separate rectifiers, two of which are capable of 3.000VA. Unusually for an amplifier, not all of the capacitors are mounted in a capacitor bank, as some of them are located directly adjoining the output stage for faster power delivery. All resistors are laser trimmed metal film from Vishay with a precision of 0.1%. The B-150XS delivers 100W in 8 ohm and 200W in 4 ohm.

The transformer is custom-made for the B-150XS, and is winded using a new technique. This technique reduces vibration from the transformer and therefore reduces mechanical noise from the cabinet. At the same time, this prevents mechanical vibrations from reaching the delicate audio signals on the PCB. It also works as an isolation transformer, thereby eliminating the need to use separate power conditioners.

The special winding techniques used also ensure that the transformer modulates less than is normal (for other amplifiers) during the delivery of large amounts of current. Transformers normally lower the voltage during the delivery of large amounts of current which results in compression of the signal’s dynamics. As a result of the new winding method the transformer in the B-150XS is extremely stiff, which means that the voltage does not drop under large current deliveries.

The printed circuit board is made of Teflon, and is double sided to allow for the signal on one side and the ground plane on the other, thereby optimising interference free signal transfer.

The B-150XS contains sockets for the SB Board for surround, DP-03 and DP-06 MM and MC stages. There is also the possibility of upgrading the B-150XS with the DNRG external power supply to further enhance the sound quality, so as to experience truly breathtaking musical experiences. The B-150XS is also prepared for the SAXO electronic crossover, so that the B-150XS can be used in active systems. This is done by mounting the crossover internally in the B-150XS in a socket. The SAXO crossover will fit all passive speakers on the market.

The DenLink system implemented in all Densen products allows 2-way communication in multiroom installations. On the B-150XS, the link system will allow the user to power up a link amplifier in the kitchen, or another room, and then control the main system in for example the living room, sending the signals to and from the kitchen, for playback in another room. It will be possible to have full display information in another room, with status on all products. The DenLink / Multiroom system is also prepared for controlling the lights, so you will be able to dim them.

specs & Features

Power output in 8 ohms: 2x125W
Power output in 4 ohms: 2x250W
Line inputs 4 sets + 2 tape loops
Pre-amp outputs 3 sets for easy connection for Bi-amping
Power supply size: 750VA
Storage Capacity: 130.000uF
THD + Noise @ rated output: <0.05%
Frequency response: 2-500.000Hz
Weight: 15 kg
Dimensions: 440x310x64mm

Reviews & Customer feedback

"Simply fantastic! Upgraded from my B-200 to a B-230, and I was overwhelmed on all levels. Dynamics, sonics, dark background. Simply fantastic!"

John Doe

Hifi Enthusiast

Do you own a B-230? We are always seeking feed-back for our products – both positive and negative. We have a clear idea about our products, but sometimes it helps to get a perspective